Microwave Data Systems MDS entraNET 2400 Spezifikationen Seite 118

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 220
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 117
108 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
MODE=<mode>—Sets the console port interface mode. MODE cannot be
set to DATA unless the device has been authorized for serial payload. To
escape from data mode, enter three consecutive + characters to COM2
with at least 100 mSec between entries.
CONSOLE—Places COM2 in command-line mode
DATA—Places COM2 in transparent data mode
BSP—Places COM2 in Basic Serial Protocol mode
INT_LOOP—Places COM2 in internal loopback mode
EXT_LOOP—Places COM2 in external loopback mode
RXDELAYCHARS= —Sets the inter-packet receive gap size in character
times (1-65535).
TXDELAY= —Sets the inter-packet delay in milliseconds (1-65535). The
minimum TXDELAY setting should be set to two times the Dwelltime set-
ting. When TXDELAY is set to less than twice the Dwelltime setting, the
measured inter-packet delay can increase up to one dwelltime (7,14, or
28 ms) period.
CONFIG Saves or displays the current configuration. The output is in a format
that may be copied back into the command line in order to set
the configuration.
Optional arguments:
SHOW—Displays the current configuration. This is a read-only response.
SAVE=FACT—Programs the current configuration into the Factory
Default configuration table. The factory default is used to restore the
configuration when the system detects a data corruption.
DEVICE Displays the device configuration, and allows setting of the OWNER,
NAME, and LOCATION.
Optional arguments:
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
COMPANY—(read only) Displays the company name.
MODEL—(read only) Displays the radio model number.
PRODUCT—(read only) Displays the product name.
REV—(read only) Displays the software revision ID.
OWNER—Sets or displays the owner information (1-40 ASCII charac-
ters).
NAME—Sets or displays the radio name (1-40 ASCII characters).
Seitenansicht 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 219 220

Kommentare zu diesen Handbüchern

Keine Kommentare