Microwave Data Systems MDS entraNET 2400 Spezifikationen PDF herunterladen (Seite 39)

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide 31

d. A login screen will be displayed that requires a user name and

password to access the Management System. Note that the

default entries are made in lower case.

(Defaults: user =

admin; password= admin)

e. The transceiver responds with the startup menu screen.

(See Figure 3-6 on Page 32.)

NOTE: If the default address of 192.168.1.1 does not work, use the

terminal-emulator procedure to communicate with the unit

through the COM1 port. The current IP address will be

displayed on the Starting Information Screen (Figure 3-6 on

Page 32).

3.1.4 Navigating the Menus

Web Browser

Navigating with a Web browser is straightforward with a framed page.

The primary navigation menu is permanently located in the left-hand

window. The right-hand window displays the current menu item.

Telnet/Terminal Session

The text-based interface, accessible through Telnet or terminal emu-

lator, uses a traditional multi-layered text menu system. To move further

down a path in the menu tree, type the letter key to the left of the menu

item. You will automatically move to the associated screen. In most

cases, use the

ESCAPE key to move back up a level.

In general, the top portion of screens will show read-only information

with no user selection letter. The bottom portion of the screen contains

parameters that can be selected for further information, alteration of

values, or to navigate to other menus.

When you arrive at a screen with user-controllable parameter fields, you

select the menu item by keying in an associated letter. If there is a user

definable value, the field will clear to the right of the menu item and you

will be allowed to type in the value you wish to use. Follow this action

by the

ENTER key to save the changes. If you make a mistake or change

your mind before pressing the

ENTER key, press ESCAPE to restore the

previous value.

In some cases, when you type a letter to select a parameter, you will see

a prompt at the bottom of the screen that says “Choose an Option.” In

these cases, press the keyboard’s

SPACEBAR to step through the avail-

able selections. When the desired option appears, press the

ENTER key to

save the selection. In some screens, several parameters may be changed

and then saved by a single keystroke. The

ESCAPE key can be used to

cancel the action and restore the previous value.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare

Microwave Data Systems MDS entraNET 2400 Spezifikationen Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Microwave Data Systems MDS entraNET 2400